How to Disassemble Infinity Massage Chair: Easy Steps

Are you ready to take apart your Infinity massage chair for troubleshooting, repair, or moving? It might seem hard, but our step-by-step guide makes it easy. Whether you’re experienced or new to DIY, our instructions will guide you through disassembling your Infinity massage chair with ease. Let’s get started and make the Infinity massage chair disassembly clear!

Key Takeaways

• Gather necessary tools and materials before starting the disassembly process
• Ensure the chair is in the home position and disconnected from power
• Remove backrest and seat cushions, armrests, and legrest in a systematic manner
• Carefully disconnect wire harnesses and note locations for easy reassembly
• Seek assistance when lifting or moving heavy chair components

Preparing to Disassemble Your Infinity Massage Chair

Before you start taking apart your Infinity massage chair, make sure you’re ready. Gather the right tools, set the chair up right, and turn off the power. This will help you disassemble it safely and smoothly.

Gather Necessary Tools and Materials

You’ll need some basic tools and materials to take apart your Infinity massage chair. Have these items ready before you start:

• Phillips head screwdriver
• Flathead screwdriver
• Allen wrench set
• Pliers
• Zip ties (for reassembly)
• Plastic bags or containers (for organizing screws and small parts)

Ensure the Chair is in Home Position

Make sure the chair is in its home position for easy disassembly and to avoid damage. Here’s how:

1. Power on the massage chair using the remote control.
2. Press the “Home” button to return the chair to its upright, default position.
3. Wait for the chair to complete its movement and come to a full stop.

Tip: If the chair doesn’t respond to the remote control, you may need to manually move the massage mechanism to the bottom of the track using the “manual” mode before proceeding with disassembly.

Disconnect Power and Remove Accessories

Before taking apart any parts, make sure to disconnect the power and remove accessories. This keeps you safe and makes disassembly easier.

With these steps done, you’re set to start disassembling your Infinity massage chair. Take your time, stay organized, and look at the manual if you need help.

Removing the Backrest and Seat Cushions

Before you start taking apart your Infinity massage chair, remove the backrest and seat cushions first. This lets you get to the chair’s inside parts easily. With a few easy steps, you’ll quickly have the cushions off.

Unzip and Remove the Backrest Cushion

First, find the zipper on the backrest cushion. It’s usually at the bottom edge. Unzip it carefully, avoiding any stuck spots. Once it’s fully open, you can take out the backrest cushion.

Put the cushion in a safe place away from harm.

Detach and Remove the Seat Cushion

Next, look at the seat cushion. It’s often held in place by Velcro or snaps. Find these and take the cushion off the chair. If it’s hard to get out, be gentle to avoid damage.

After it’s off, set it aside with the backrest cushion.

Tip: If you encounter any difficulty while removing the cushions, consult your Infinity massage chair’s user manual for specific instructions or guidance.

By following these steps, you’re ready to take apart your Infinity massage chair. With the cushions off, getting to the chair’s inside parts is easier.

Detaching the Armrests

To remove the armrests from your Infinity massage chair, start by finding and taking out the armrest bolts. Then, disconnect the air hoses and power plugs. Finally, lift the armrests off the chair. This process needs careful attention and handling of the chair’s parts.

Locate and Remove Armrest Bolts

First, find the bolts that hold the armrests to the chair. They’re usually at the base of each armrest. Use a socket wrench or Allen key to remove the bolts. Set them aside for later.

Disconnect Air Hoses and Power Plugs

After removing the armrest bolts, disconnect the air hoses and power plugs. These are for the air massage and heating in the armrests. Pull the air hoses away and unplug the power plugs carefully.

Remember where each hose and plug goes for easy reassembly later.

Lift and Remove Armrests

With the bolts and connections removed, lift the armrests off the chair. Hold each armrest and lift it up carefully. Make sure not to damage anything. If they’re hard to remove, check that everything is disconnected correctly.

Once the armrests are off, put them in a safe place. Now, you can move on to disassembling your Infinity massage chair.

Separating the Chair Piece from the Frame

Now that you’ve taken out the backrest and seat cushions, it’s time to separate the chair piece from the frame. You need to remove the screws and lift the chair piece over the frame spikes. Make sure to follow the instructions carefully to avoid any issues.

Remove Screws Securing the Chair Piece

Find the screws that keep the chair piece attached to the frame. You’ll see six screws on each side of the track. Use the right screwdriver to remove these screws. Put each screw in a labeled container or bag as you take them out, so they’re easy to find later.

Tip: To make this step easier, ensure that the massage mechanism is positioned at the bottom of the chair before removing the screws.

Lift Chair Piece Over Frame Spikes

After removing all the screws, the chair piece should come loose from the frame. Lift it up carefully, making sure to avoid the spikes on the frame. These spikes keep the chair piece in place when you’re sitting, so be extra careful.

Be gentle and patient when separating the chair piece from the frame. Rushing this process could result in damage to the components or injury to yourself.

Once you’ve lifted the chair piece over the spikes, set it aside safely. You’ve successfully separated the main parts of the chair. This lets you get to the massage mechanism and keep disassembling.

Accessing the Massage Mechanism

Now that the chair piece is off the frame, you can get to the massage mechanism inside your Infinity massage chair. This is key for upkeep, fixes, or adding new parts to the chair’s inside.

Power On and Move Mechanism to Top of Chair

First, lay the chair piece down in front of the chair, making sure it’s steady and safe. Then, use the remote to turn on the chair and switch to manual mode. This lets you move the massage mechanism by yourself. Move it to the top of the chair slowly and carefully for easy access next.

Remove Bracket Screws

With the mechanism at the top, find the brackets that hold it in place. These are usually on both sides of the mechanism. Use the right screwdriver to take out the four screws from each bracket side. Keep these screws somewhere safe, as you’ll need them to put it back together.

Be careful not to rush, as it could damage parts or lose screws. Make sure all screws are out before you try to lift or move the mechanism.

After removing the bracket screws, you can fully access the massage mechanism. This lets you do any needed maintenance, repairs, or upgrades. Be gentle with the parts and keep track of everything you remove for easy reassembly.

Disconnecting the Wire Harness

To take apart your Infinity massage chair, start by disconnecting the wire harness. This means opening the power box, unplugging certain cables, unscrewing the ground wire, and cutting zip ties. Remember where they go for putting it back together.

Open Power Box and Unplug Marked Cables

First, find the power box on your Infinity massage chair. Open it to see the wires inside. You’ll see cables with labels or colors. Unplug these cables from their connectors, remembering where they go for later.

Unscrew Ground Wire

Then, find the ground wire near the chair’s middle. It connects to a cylinder. Use a screwdriver to unscrew it from its spot. Be careful not to harm other parts when removing the ground wire.

Cut Zip Ties and Note Locations for Reassembly

There are many zip ties holding the wires together. Use scissors or wire cutters to cut each one. As you remove them, remember where they were. This helps you put the wires back correctly later.

Remember to keep track of all the disconnected wires, unplugged cables, unscrewed ground wire, and cut zip ties. Proper organization will make the reassembly process much smoother and ensure your Infinity massage chair functions correctly when put back together.

With the wire harness disconnected, you’re closer to finishing the disassembly of your Infinity massage chair. Next, you might need to manually move the mechanism to get to other parts.

Manually Driving the Mechanism (If Needed)

Sometimes, the massage mechanism won’t go up by itself, or the chair might lose power. You can still move it by hand. Just take off the disk cover and turn the motor bolt manually.

Remove Disk Cover

First, remove the disk cover to see the motor bolt. It’s on the side of the massage mechanism. Carefully take it off and put it somewhere safe. You’ll need to put it back later.

Turn Motor Bolt to Drive Mechanism

With the cover off, you can see the motor bolt. Use a wrench or pliers to turn it slowly. This moves the massage mechanism up the track.

Be patient when moving the mechanism by hand. It might take a while, but it works when the chair isn’t working right. Keep turning the bolt until it reaches the top of the track.

Manually driving the mechanism should only be done when absolutely necessary, such as when the chair has lost power or the mechanism is not moving automatically. It is important to exercise caution and patience to avoid damaging the chair’s components.

After moving the mechanism to the top, you can start taking it apart. Don’t forget to put the disk cover back on when you’re done. This protects the motor and other parts inside.

Disassembling the Legrest

First, separate the chair piece from the frame and get to the massage mechanism. Then, it’s time to take out the legrest. You’ll need to disconnect the air hose and electrical connection. Also, use an allen wrench to remove the legrest from the chair.

Disconnect Air Hose and Electrical Connection

Start by finding the air hose and electrical connection. These supply power and air pressure to the legrest. Carefully take the air hose apart from its fitting without damaging it. Then, unplug the electrical connection that runs the legrest’s massage features.

Remember where these connections are for easy reassembly later.

Remove Legrest Using Allen Wrench

After disconnecting the air hose and electrical connection, you can take out the legrest. Find the allen wrench that came with your chair. This tool is key for removing the bolts that hold the legrest to the frame.

Use the allen wrench to remove the bolts. Make sure to keep track of the bolts, washers, and spacers for reassembly. Once the bolts are out, lift the legrest off the chair frame carefully to avoid damage.

Tip: If you encounter any difficulty while removing the legrest, consult your Infinity massage chair’s user manual for specific instructions or contact the manufacturer’s customer support for guidance.

Now that the legrest is apart, you can move on to the next steps or start repairs on the legrest parts.

Tips for Easier Disassembly and Reassembly

When taking apart your Infinity massage chair, follow these tips for a smoother process. They’ll help you stay organized and make reassembly easier. You won’t have to worry about missing parts or getting confused.

1. Take photos or videos of each step during disassembly. This visual guide will be key for reassembly, letting you see how everything fits.
2. Label all parts, screws, and connectors as you remove them. Use a permanent marker or adhesive labels to mark each component and its spot. This saves time and reduces frustration later.
3. Keep all components organized in labeled bags or containers. Put parts in separate, labeled containers or resealable bags as you remove them. This prevents small pieces from getting lost and keeps your workspace tidy.
4. Follow the user manual for specific instructions on your Infinity massage chair model. While general tips apply, your chair’s manual may have unique steps or considerations.

Using these reassembly tips, you’ll feel confident and in control during disassembly. Documenting and organizing each step will help when you’re putting your chair back together. It ensures a smooth and stress-free experience.

Remember, a little extra effort during disassembly can make a big difference when reassembling your massage chair.

It’s also wise to have a clean, well-lit workspace and set aside enough time for disassembly. Rushing or working in a cluttered area can lead to mistakes or lost parts. This makes reassembly harder.

With careful planning, organization, and attention to detail, you’ll successfully disassemble and reassemble your Infinity massage chair. This way, it will continue to provide you with relaxation and comfort.

Conclusion

Breaking down your Infinity massage chair might look tough at first. But, with the right tools and a step-by-step guide, you can do it easily. This guide is perfect for fixing the chair, doing regular upkeep, or moving it.

Always check your chair’s user manual for specific advice and safety tips before you start. If you run into problems or have questions, don’t worry. Just contact Infinity’s tech support for help.

Follow these steps and keep all parts in order. You’ll be able to take apart your Infinity massage chair and fix any problems. With some patience and care, you’ll get your chair working great again. It will be ready to give you the best relaxation.

Source Links

• What is the Best way to Relocate my Chair? – https://infinitymassagechairs.com/blog/post/2014/09/17/best-way-to-move-massage-chair
• Infinity Escape Massage Mechanism Replacement – https://www.ifixit.com/Guide/Infinity Escape Massage Mechanism Replacement/103271
• Palisade-manual – https://infinitymassagechairs.com/content/docs/manuals/Palisade-Manual.pdf